Exhaust Tech Videos

Bullseye Power Turbo Video Install Part 3 - S71 Olds Project V8TV
Bullseye Power Turbo Video Install Part 3 - S71 Olds Project V8TV
#musclecar #v8tv Installation Available: http://v8speedshop.com/contact In this chapter of our S71 Olds build, we are completing the install of our Bullseye Power 75 mm turbo, our fabricated turbo piping, Bell intercooler , and the Be Cool Radiator . All of the exhaust tubing and turbine housing parts were coated by Extreme Powder Coating using their 2200° high temperature black ceramic coat...
Bullseye Power Turbo Video Install Part 2 - S71 Olds Project V8TV
Bullseye Power Turbo Video Install Part 2 - S71 Olds Project V8TV
#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - In this chapter, we're fabricating the hardware and tubing needed to install the Bulleseye Power 75 MM extended tip turbo from Outlaw Turbo Motorsports into our 1971 Olds Cutlass S71 project. The install required mating the stoc...
1969 Chevelle SS496 Restoration Review Video Feature V8TV
1969 Chevelle SS496 Restoration Review Video Feature V8TV
1969 Chevelle SS496 Restoration Review Video Feature V8TV Installation Available: http://v8speedshop.com/contact http://www.v8tvshow.com/ss496 - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - We completely restored this 1969 Chevelle, taking it from "bass boat" green to the original color, replacing much of the original sheet metal and adding some key upgrades. We instal...
1969 Pontiac Firebird
1969 Pontiac Firebird "Routy" Engine Install and First Start Video V8TV
#musclecar #v8tv http://www.v8tvshow.com - The time came to install the rebuilt 1973 Pontiac 400 into our '69 Firebird. It's running a rebuilt bottom end, roller rockers, #16 Pontiac iron heads, a Professional Products intake manifold, MSD ignition, h Holley carb, Royal Purple break-in oil & filter, and Eastwood coated long-branch exhaust manifolds leading to MagnaFlow exhaust. Also shown is ...
MagnaFlow 2010 Hot Rod Power Tour Interview Video V8TV
MagnaFlow 2010 Hot Rod Power Tour Interview Video V8TV
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - We visited with the crew from MagnaFlow on the 2010 Hot Rod Power Tour to learn that they're a step ahead of us in solving the issue of building a trick exhaust system for big Chevrolets from the late '50s and early '60s. We're building a 1959 Chevy Biscayne called Post Modern, and it ...
V8TV '65 Chevelle MagnaFlow Exhaust Install Video
V8TV '65 Chevelle MagnaFlow Exhaust Install Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Muscle cars need free-flowing exhaust to make power, but that does not mean the have to be obnoxiously loud. However, we all like that sweet rumble from a healthy engine, but not droning in the cabin. What to do? Check out this install video of a MagnaFlow stainless exhaust system w...
V8TV Update: MagnaFlow Exhaust Preview on 1965 Chevelle-Video
V8TV Update: MagnaFlow Exhaust Preview on 1965 Chevelle-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Here's a quick look at our MagnaFlow dual 2.5" exhaust system on our '65 Chevelle... these systems install really easily, are good for power, and sound great. We like 'em. Complete install video to come! -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration ...
SEMA 2009 Video Coverage: MagnaFlow Exhaust V8TV
SEMA 2009 Video Coverage: MagnaFlow Exhaust V8TV
#musclecar #v8tv Magnaflow turned things upside-down at SEMA... including all the cars in their booth! Here, we get a look at the new 2010 Camaro complete exhaust system that won't be seen anywhere else! -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration Shop Tour V8 Speed & Resto Shop November 2018 V8TV" https://www.youtube.com/watch?v=NgMz3iRMHWE -~-~~-~~~-~~-~-
V8TV iPhone Update: '69 Camaro Exhaust-Video
V8TV iPhone Update: '69 Camaro Exhaust-Video
#musclecar #v8tv Mating the Hooker Competition Nightsides headers to the exhaust. -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration Shop Tour V8 Speed & Resto Shop November 2018 V8TV" https://www.youtube.com/watch?v=NgMz3iRMHWE -~-~~-~~~-~~-~-
1966 GTO: Starting The L92 V8 For The First Time!  V8TV-Video
1966 GTO: Starting The L92 V8 For The First Time! V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. -In this installment, the 1966 GTO's L92 V8 finally comes to life! Once we had our Magnaflow exhaust system connected to the polished ceramic Hooker LS1 A-Body swap headers, we topped off the fluids with Royal Purple Synthetic Engine Oil, MAX ATF Transmission fluid, and Purple Ice radi...
MIG Welding Tips:  Exhaust Tubing  V8TV-Video
MIG Welding Tips: Exhaust Tubing V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Here's a quick tip on welding exhaust tubing with your MIG welder... do it HOT and FAST! This technique shows how to burn deep-penetrating, low-profile welds that look great on their own or can be easily dressed for polishing or coating. The secret is to use high amperage (or heat)...
Ford GT Supercharger Upgrade Dyno Tune Part 1 V8TV-Video
Ford GT Supercharger Upgrade Dyno Tune Part 1 V8TV-Video
#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8tvshow.com - There are those who think the 2006 Ford GT is fast enough from the factory. Of course, we're firm believers in maximizing performance, so we installed an upgraded supercharger pulley, exhaust, and air filters to this modern supercar. -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Musc...
1971 Olds S71 Turbo Manifold Mock Up V8TV-Video
1971 Olds S71 Turbo Manifold Mock Up V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Sometimes the simple solution eludes you. In this case, we've been gearing up for the turbocharger install on the S71 Olds project. We've got our diesel block and new parts set aside, and we're using the original 350 engine to mock up how we want the turbo to fit in the car. We ...
Finish Line Performance V8TV-Video
Finish Line Performance V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - We recently visited Finish Line Performance in Naperville, IL, to check out their open house and see some killer cars. Finish Line Performance is not only a very reputable 2 and 4-wheel dyno tuning facility, but they also build everything from custom mandrel-bent exhaust, turbo, and intake systems to complete engines and restorations. We take a look ...
1966 GTO - Exhaust Through The Bumper V8TV-Video
1966 GTO - Exhaust Through The Bumper V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - We were looking for cool way to finish off the Magnaflow exhaust kit we got from YearOne on the GTO, and noticed that the factory reverse lights would make a nice exit point to run the pipes through the bumper. Scott Guhene made it happen, and it looks slick. -~-~~-~~~-~~-~- Take a ...
1969 Chevelle SS496 Blog Part 53 - 1 Day Left to SEMA V8TV-Video
1969 Chevelle SS496 Blog Part 53 - 1 Day Left to SEMA V8TV-Video
#musclecar #v8tv http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - The sound of a muscle car is half the attraction, and tonight, Scott Guehne began installing the 2 1/2 inch stainless exhaust kit from Magnaflow. Magnaflow systems are nice because they are pre-bent for the car, all mandrel bent, stainless steel, and they utilize cool clamps and hardw...
TIG Welding Basics and How-To Video With HTP Welders V8TV Video
TIG Welding Basics and How-To Video With HTP Welders V8TV Video
#musclecar #v8tv http://www.usaweld.com - Basics of TIG welding with HTP Welders. -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration Shop Tour V8 Speed & Resto Shop November 2018 V8TV" https://www.youtube.com/watch?v=NgMz3iRMHWE -~-~~-~~~-~~-~-

In this video series, we're upgrading a 1969 Camaro SS 396 for better performance using an Edelbrock Top End Kit consisting of E-Street Heads, a RPM intake manifold, a mild street camshaft, and the required hardware and gaskets to put it all together. We're adding a Holley Street Avenger Aluminum 670 carburetor for fuel, and an MSD Digital E-Curve distributor for spark. The Camaro will breathe better with a dual MagnaFlow stainless exhaust system, and it will run smoothly on Royal Purple Break-In Oil and Max Gear transmission oil. We're also adding a Centerforce clutch for more grab. Under the car, we're detailing the subframe and suspension with Eastwood Underhood Black paint, and installing Global West Del-A-Lum bushings up front. A Baer Track disc brake kit is going on for better stopping power, and a Chassis Engineering front sway bar will help this car corer better.

 

Muscle cars need free-flowing exhaust to make power, but that does not mean the have to be obnoxiously loud. However, we all like that sweet rumble from a healthy engine, but not droning in the cabin. What to do? Check out this install video of a MagnaFlow stainless exhaust system with its flow-through mufflers and True-X crossover tubes. Not only does it look slick, but it installs easy, does not rob power, and sounds great at all the right times.

 

The next step was to install a high pressure EFI fuel system in our '55 Thunderbird. For the soft lines, we used all TechAFX hoses and fittings. Trevor routed the rest of stainless steel hard lines to fit tight against the frame, away from moving suspension parts or exhaust. For a fuel pump we used an in-tank sump pump kit from Tanks Inc. Finally, We ordered a MagnaFlow custom exhaust kit for this car and nick ran the pipes through the X frame and out the of back.

 

Once we got the Firebird disassembled, we decided it would be best to repaint the firewall, clean up the underside, and put some work into the subframe. Once we had all those areas to the same level as the rest of the car, we put in the 468 motor and Tremec transmission. We also installed a Hydratech Hydroboost system with a CPP master cylinder for improved brakes. Then we tied it all together with an oval tube exhaust system, E-85 friendly fuel lines and tank, and some Royal Purple break in oil for the first start.

 

We stopped at MagnaFlow to check out a sweet '67 Nova built by Greening Auto Company on display at the 2013 SEMA show in Las Vegas. MagnaFlow also released some new exhaust parts, including custom built headers! We also got to spend a few minutes with Miss MagnaFlow, Amanda Landry!