Classic Car Interior Tech: Seat Restoration and Cover Installation V8TV Video
Classic Car Interior Tech: Seat Restoration and Cover Installation V8TV Video
Installation Available: http://v8speedshop.com/contact http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - The seats in our 1962 Ford Galaxie were in need of some attention, so we took them to the guys at HyTech Auto Interior to be recovered. In this video, Matt Sebastian takes us through the steps to turn an old worn out seat into a brand new one using...
Custom Autosound Slidebar Radios & The System Hidden Subwoofer Video
Custom Autosound Slidebar Radios & The System Hidden Subwoofer Video
http://www.customautosound.com - Custom Autosound is your source for high-quality audio systems that match your classic car's design. Their new feature packed Slidebar radios feature digital device connectivity, high power, and quality sound from a unit that looks like it belongs in your dash. Their hidden speaker systems deliver big sound from powered subwoofer units and unique midrange and...
ARP - The Ultimate Fasteners!
ARP - The Ultimate Fasteners!
http://www.arp-bolts.com - ARP manufactures the ultimate fasteners for the inside - and outside - of your ride!
1968 Camaro Roof and Window Rust Repairs Video V8TV
1968 Camaro Roof and Window Rust Repairs Video V8TV
http://wwww.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Our 1968 Camaro had some bad rust around the windows thanks to the original vinyl top holding moisture and corroding the steel below. In this video, we repair all that with a some new panels from Classic Industries, some 3M cutting and grinding tools, our HTP MIG 200 welder, and a Body Solder kit from...
Metal Shop Tech: Working Panels Straight With An HTP Stud Gun Video V8TV
Metal Shop Tech: Working Panels Straight With An HTP Stud Gun Video V8TV
Installation Available: http://v8speedshop.com/contact In the old days, one could pull dents by drilling holes in panels and yanking them out with a slide hammer. Today, tools like the HTP Stud Setter allow you to not only pull dents without leaving holes in them, but also to shrink metal and install trim studs with the same tool. (Anyone restoring a muscle car knows what a pain replacing ...
Quick Tip For Cleaning Hardware:  Eastwood Fast Etch Video V8TV
Quick Tip For Cleaning Hardware: Eastwood Fast Etch Video V8TV
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Sometimes you need hardware store grade nuts and bolts for your project, and they often times come with colored dye on them. This stuff can be a pain and a time killer to remove, but we found that Eastwood Fast Etch zaps it off quickly.
1965 Chevelle Wetsanding & Buffing New Paint Video V8TV
1965 Chevelle Wetsanding & Buffing New Paint Video V8TV
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Our 1965 Chevelle's paint looked really nice coming right out of the spray booth, but we knew that by wetsanding and buffing the car with 3M's Trizact system, this car would have a perfectly flat show-car finish. The process involves wetsanding the car by hand as well as using air-powered dual-action san...
2010 SEMA V8TV Video Coverage: The Latest Restoration Supplies From Eastwood
2010 SEMA V8TV Video Coverage: The Latest Restoration Supplies From Eastwood
The Eastwood Company is constantly bringing new restoration tools and supplies to market, and we learn about some of the latest in this video.
1971 Olds
1971 Olds "S71" Dash Pad Restoration V8TV-Video
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Restoring our faded, cracked, and ugly dash pad with the help of Just Dashes.
1966 GTO Part 8:  Ceramic Chassis Paint V8TV Video
1966 GTO Part 8: Ceramic Chassis Paint V8TV Video
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - After spending time reinforcing the GTO's chassis, we shot it with a new paint system from Eastwood. The base started off with their high-build 2-part catalyzed Epoxy Primer, and then we topcoated it with their new Ceramic Chassis Black in the satin finish. We used a 3-gun DeVilbiss Startingline HVLP...
1965 Chevelle Blog 6: Chassis Restoration V8TV-Video
1965 Chevelle Blog 6: Chassis Restoration V8TV-Video
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - We had our 1965 Chevelle SS frame media blasted and stripped clean, and then it was time to give it a new protective coating. This time, we utilized the new Extreme Chassis Black Epoxy paint from Eastwood. We found it to have an accurate satin appearance, and it seems to have the guts to stand up to t...
1971 Olds
1971 Olds "S71" - Body Seam Sealer V8TV-Video
http://www.v8tvshow.com - Media blasting removes all the old paint and rust, and also most of the original seam sealer. After we picked out the remaining old caulk, Randy masked the bottom of the S71 and brushed in a 3M body seam sealer to reseal the panels.
1971 Olds
1971 Olds "S71" - Epoxy Priming The Body - V8TV-Video
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Bare steel bodies are cool to look at, but it's time to start the bodywork phase on the S71 Olds. This time, we sprayed the underside of the car with PPG DCX 1791 etch primer and then DP90 epoxy primer. Our painter Randy uses SATA spray guns and 3M safety masks and gloves with this stuff. DP90 is bl...
1971 Olds
1971 Olds "S71" Fender Patch V8TV-Video
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - We're beginning the bodywork on our 1971 Olds project, and we're trying to save all the original steel if possible. This time, we're patching the lower fenders, as these cars - all GM "A" bodies in general - seem to have rusty holes in their fender bottoms. The design allowed them to hold leaves, pine...
How To Buff And Polish Like A Pro With An Eastwood Buffer Video V8TV
How To Buff And Polish Like A Pro With An Eastwood Buffer Video V8TV
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Polishing parts can be very rewarding if you know how to do it and have the right gear. We picked up an Eastwood buffing motor, stand, and polishing kit to be able to do this kind of work in-house. We learned that there are a variety of different kinds of buffing and polishing wheels, and the various ...
ARP Ultimate Driveline Fasteners
ARP Ultimate Driveline Fasteners
http://www.arp-bolts.com/
Car Restoration Welding:  How To Use Resistance Spot Welders Video V8TV
Car Restoration Welding: How To Use Resistance Spot Welders Video V8TV
http://www.v8tvshow.com - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Classic and Muscle Cars were assembled using resistance spot welders when originally manufactured, and you can recreate those welds with the proper equipment. In this video, we show you how to use the HTP Quick Spot II and Versa Spot 7000 resistance spot welders to reconstruct body panels. You can s...
Quarter Panel Install Replacement Tips Restoration Tech 1970 Buick GS V8TV-Video
Quarter Panel Install Replacement Tips Restoration Tech 1970 Buick GS V8TV-Video
Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com - SEE MORE: http://www.v8tvshow.com/buickgs - Replacing quarter panels can be a daunting but necessary task when restoring a Muscle Car. In this video, V8 Speed & Resto Shop Technician Adam Schulte shows us some tips on replacing the trunk floor, wheel house, and quarter panels on a 1970 Buick GS 455 Stage 1...
New Steering Columns from Ididit at 2014 SEMA Show V8TV Video
New Steering Columns from Ididit at 2014 SEMA Show V8TV Video
http://www.ididitinc.com - Ididit, Inc. brought out some new steering column applications at the 2014 SEMA show in Las Vegas, including highly-anticipated retrofit tilt columns for Ford Falcons and Broncos. Here, we learn about these new parts as well as some insight on how to properly measure for a custom column for any application.
V8TV Quick Tip - Restoration Disassembly Tips Video
V8TV Quick Tip - Restoration Disassembly Tips Video
http://www.v8tvshow.com - 314.783.8325 Produced by Kevin Oeste and V8TV Productions, Inc. - In this quick video, Kelle reminds us to be organized when disassembling a Muscle Car for restoration. Using ziploc bags and sharpie markers are good ways to keep track of parts so things can be quickly found upon reassembly.
High Tech Vintage Aluminum Wheel Restoration and Custom Tires Video V8TV
High Tech Vintage Aluminum Wheel Restoration and Custom Tires Video V8TV
http://www.v8speedshop.com - 314.783.8325 Produced by Kevin Oeste and V8TV Productions, Inc. https://www.dentwizard.com/wheels.aspx - 866-282-0544 http://www.dbtires.com - 888.922.1642 http://www.vintagewheelworks.com - If your custom aluminum wheels have seen better days, there is a possibility that they can be restored to look new again. We took our Vintage Wheel Works V45 wheels that hav...
Custom Autosound Feature Video at SEMA 2015 V8TV
Custom Autosound Feature Video at SEMA 2015 V8TV
http://www.customautosound.com - You can't have a cool Classic or Muscle Car without great tunes on board, but nobody wants an audio system that looks out of place. That's where Custom Autosound comes in, as they make high-quality audio components that have the look to match the sound.

Sometimes you need hardware store grade nuts and bolts for your project, and they often times come with colored dye on them. This stuff can be a pain and a time killer to remove, but we found that Eastwood Fast Etch zaps it off quickly.