Lancaster; NY: There are some automotive hobbyists who would rather do everything themselves. While CLASSIC TUBE has a library of over 20,000 pre-bent tubing patterns, they recognize the needs of the dedicated do-it-yourselfer. Now you can create your own brake, fuel, transmission, vacuum or hydraulic lines with their bulk Stainless Steel or original equipment steel tubing coils. Available in 20-foot rolls, the Stainless comes in 1/8 to 1/2-inch OD, while the OE steel comes in 1/4 to 3/8-inch OD.

CLASSIC TUBE’s Stainless Steel tube is double annealed SAE (Society Of Automotive Engineers) 304-grade, which is easy to flare and bend. The OE steel is an annealed cold-rolled, low carbon continuously welded tube. While Stainless Steel is impervious to weather, the OE steel is protected with a two part Galfan® galvanizing with a topcoat of an aluminum rich epoxy. All CLASSIC TUBE tubing conforms to SAE J526 specifications for single wall, and SAEJ527 for double wall, double weld. Color coded SAE or Metric end fittings, in steel or stainless steel, are machined to SAE J512 specs. Order accessories like proportioning valves, flaring tools and spring wrap to complete your DIY project.

For additional information on their pre-bent fuel, brake, transmission, vacuum and other tubing products visit www.classictube.com or contact the tubing experts at CLASSIC TUBE, 80 Rotech Drive, Lancaster, NY 14086, 800-882-3711, Fax: 716-759-1014.