Brett Evans wanted to build a car that does everything. It had to have dragstip guts and the ability to stick in the turns. After much thought, Brett decided on a second-generation GM F-body for the car. He located a clean 1970 Trans Am clone, which added another dimension to this project – it wasn’t your typical Chevy. Even cooler is that Brett is running a Pontiac engine to power this project. A dual purpose car with Arrowhead power – Splitter was born. Discuss this project on the V8TVForum!
|
|
 Part of our 1970 Pontiac Trans Am's dual personality is drag strip performance, and Splitter delivers on the track. Here Brett Evans pilots the car to a 9.28 / 147 mph pass in a recent street car drag event.
|
|
 Splitter is all back together and it was finally time to take to the streets! Brett Evans toured us around with the 1970 Pontiac Trans Am clone through some quite backroads, but it's hard to be inconspicuous in a borderline race car! We'll be at the track soon to get some real numbers, both at the drag strip and on the road course.
|
|
 Project "Splitter" 1970 Trans Am finally comes to life! Brett Evans and crew install it's new Coan Turbo 400 transmission, TCI Torque Convertor, and the Gear Vendors Overdrive unit. First drive is not far off!
|
|
 The engine's been tuned, the parts are all togeher... now Brett takes us through Splitter's engine bay and the 541 Pontiac with all the accessories from March, Edelbrock, MSD, and Butler Performance all installed. Brett also points out some tricks to install large-tube Hooker Headers on the big All Pontiac.com block. It won't be long before the key is turned!
|
|
 In order to compete with Project Splitter's 850 natural horspower, we need to make sure this thing stops. In addition to Baer hardware at all four corners, a Hydroboost booster from Hydratech will provide the clamp to bring this monster to a halt, and fast!
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
| Results 1 - 9 of 12 |
