We wanted our 1968 Camaro to retain its classic appearance, but handle and drive like today's best sports cars. To accomplish this, we relied on a Speed 3 front suspension kit from Detroit Speed and Engineering that we obtained through Classic Industries. This kit consists of tubular upper and lower control arms, a coil over spring and shock kit, new quick ratio steering components, and is installed into the stock Camaro subframe.  We also restored the subframe with some epoxy primer and satin black paint from BASF and some Eastwood Internal Frame Coating.     You'll also see a trick on protecting those freshly painted parts with some 3M Masking Film.   Next time, we will be installing a DSE Quadra Link rear suspension to complete the handling upgrades on this 1968 Camaro.

DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. V8TV Productions, Inc. makes no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program. c. 2011, V8TV Productions, Inc.

Share this link on your favorite social network!