In this chapter, we're fabricating the hardware and tubing needed to install the Bulleseye Power 75 MM extended tip turbo from Outlaw Turbo Motorsports into our 1971 Olds Cutlass S71 project.   The install required mating the stock exhaust to the custom turbo mount, then sending the exhaust out the custom MagnaFlow 3" dual exhaust system.   Other tasks include installing the large Bell intercooler in the nose of the car, installing a TurboSmart Race Port 50 wastegate, and fabricating all the tubing to manage the airflow.    In the next chapter, we high-temp coat the parts, install the TurboSmart blow off valve, complete the tubing, and address the cooling and oiling systems.

Discuss This Car's Build In The V8TV Forum!  Click Here!

Outlaw Turbo Motorsports

 DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. V8TV Productions, Inc. makes no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program. c. 2011, V8TV Productions, Inc.

Share this link on your favorite social network!