www.V8TVshow.com - Splitter's 541 Inch Pontiac Engine

Main Menu

HOME / LATEST VIDEO

NEW! V8TV Radio!

Syndicate V8TV!

HOME / LATEST VIDEO

Splitter's 541 Inch Pontiac Engine

We turned to the Pontiac pros at Butler Performance for insight on building Splitter's street / strip / road course engine. This one has to do it all, so the parts need to be carefully chosen to get the job done. David Butler takes us through the parts and explaines his choices.

SOURCES

Butler Performance

Comp Cams

All Pontiac.Com

Edelbrock Performance

T&D Machine

Ross Pistons

DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. The Men's Channel and V8TV Productions, Inc. make no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program.

» 1 Comment

1"Woot"
at Thursday, 01 January 2009 23:33by Greg

Hell of a good engine seen this bloock in action built to factory spec 400 for stock comp class running 9 sec 1/4 mile no nos no power adders at all in a bone stock 66 GTO Less the drive line being fully built rollcage for safty drive loop slicks ect all the race godies but body being door slamer turbo 400 BOP 4500 stall line lock ect. the car looks like a stock off the show room car with a 8 point in it. 1 bad motor. Good luck getting 1 tho. If you don\\\'t know Buttler or have a name

» Post Comment