This batch of photos of the '66 GTO project provides more detail on the electronics and wiring in the car. You'll find shots of the MAST Motorsports M90 ECM, their engine harness, their CAN gauges, and power and relay centers. Next up is the TCI Transmission Control Unit and harness. Near the end are a couple shots of the Swagelok stainless 3/8" tube to -6 AN adapter fitting we used to connect the Earl's fuel hose to the engine. Click the title to see all the photos!
CAN cables for MAST gauges
MAST Drive-By-Wire throttle pedal assembly
MAST Air filter with Air Inlet Temp sensor fitting
Mast M90 ECM (right)
Mast / VDO CAN gauges
MAST Powercenter
TCI Transmission Control Unit
Swagelok connector on fuel rail - connects 3/8" tube to -6 AN
DISCLAIMER:
Demonstrations and procedures contained in the V8TV show or website may
not provide all necessary or relevant information. Applicable local
laws and regulations may vary and should be checked before any project
is commenced. Be sure to follow all applicable safety procedures. V8TV
Productions, Inc. makes no warranties, expressed or implied, as to the
completeness, accuracy, or practicality of any such demonstration or
procedure or any information with respect thereto contained in the
preceding program. C. 2008, V8TV Productions, Inc.
Share this link on your favorite social network!
» No Comments
There are no comments up to now.
» Post Comment
Only registered users can write a comment. Please login or register.
This batch of photos of the '66 GTO project provides more detail on the electronics and wiring in the car. You'll find shots of the 
