Choosing a rear axle for your project is an important part... you have to get the right gear ratio, the kind of differential you want, correct rear brake configuration, axle spline count, and it has to be strong enough for your combination as well as fit in the car!    The days of junkyard Ford 9 inch rear axles are gone, so and even if you find one, you still have to cut it to fit, make sure it's striaght, weld up mounts, media blast and paint it.   Then, you have to tear it apart, rebuild the housing with new bearings, obtain stronger axles, a new differential, new gears, install the gears and set them up right, find brake mounts... or you can zip to the Currie Enterprises website , click a couple times, and a brand-new, correct sized 9 Plus rear axle is shipped to your door.  And it is perfectly set up with the options you want, with no hassles.  The choice was simple to us.  

SOURCES

Discuss this project in the V8TV Forum! 

DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. V8TV Productions, Inc. makes no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program. C. 2008, V8TV Productions, Inc.  

Share this link on your favorite social network!