www.V8TVshow.com - 1969 Firebird Seam Sealer Video

CONATACT V8TV

Click For Info
To Learn How
V8TV Can Build
Your Dream Car!

FOLLOW V8TV

HOME / LATEST VIDEO

1969 Firebird Seam Sealer Video - V8TV

After the metalwork was completed on the bottom side of our 1969 Pontiac Firebird "Routy", we applied some Eastwood Epoxy Primer to the underside and inside of the body shell to prevent rust and to provide a base for the next steps. We then sealed all the seams with 3M Automix Heavy Bodied Seam Sealer (8308) using their pneumatic applicator. We like to mask off the seams with 3M tape, then apply the sealer, brush it smooth, and then peel the tape before the sealer hardens. The sealer ensures no moisture will creep between the panels and start to rust. Once sealed up, we scuffed the primer and applied several coats of Eastwood 2K Ceramic Chassis Black on the bottom and inside of the body. The 2K Ceramic Chassis Black looks like the factory black used on chassis parts, but is far more durable than regular paint.

SOURCES

Eastwood

Primer, Ceramic Chassis Black Paint

Tape, Seam Sealer

DISCLAIMER: Demonstrations and procedures contained in the V8TV show or website may not provide all necessary or relevant information. Applicable local laws and regulations may vary and should be checked before any project is commenced. Be sure to follow all applicable safety procedures. V8TV Productions, Inc. makes no warranties, expressed or implied, as to the completeness, accuracy, or practicality of any such demonstration or procedure or any information with respect thereto contained in the preceding program. c. 2010, V8TV Productions, Inc.

Share this link on your favorite social network!