Once the Standox Sprayable Polyester was block sanded to a 220 grit surface, body tech John Blandford prepped our 1965 Chevelle's body for a couple coats of DuPont Hot Prime primer. The Hot Prime is part of the Hot Hues line, and provides the last sandable layer before final sealer and then color. John sprayed the primer using a SATA KLC spraygun and the 3M PPS cup system. The KLC HVLP low overspray primer and filler gun for its ability to finely atomize heavier materials reducing the amount of sanding needed for a flat surface, and the PPS cup system makes clean-up simple with less solvent waste. The next chapter in the '65 Chevelle story... spraying the color!