#musclecar #v8tv http://www.v8speedshop.com - Here's a quick update video from the V8 Speed & Resto Shop, where body tech Craig takes us through the beginning of a patch for a 1970 El Camino restoration in progress. You can see photos of this car at http://www.v8speedshop.com/contact/photos . Take a tour of the V8 Speed & Resto Shop! Muscle Car Restoration Shop Tour at V8 Speed & Resto Shop ...

http://www.customautosound.com - Custom Autosound is your source for high-quality audio systems that match your classic car's design. Their new feature packed Slidebar radios feature digital device connectivity, high power, and quality sound from a unit that looks like it belongs in your dash. Their hidden speaker systems deliver big sound from powered subwoofer units and unique midrange and...

http://www.ARP-bolts.com - ARP manufactures the ultimate fasteners for the inside - and outside - of your ride!

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com - SEE MORE: http://www.v8speedshop.com/contact/buickgs - Replacing quarter panels can be a daunting but necessary task when restoring a Muscle Car. In this video, V8 Speed & Resto Shop Technician Adam Schulte shows us some tips on replacing the trunk floor, wheel house, and quarter panels o...

#musclecar #v8tv http://www.mittlerbros.com - Mittler Brothers brought out some new fabrication tools at the 2013 SEMA show in Las Vegas, and Mike Mittler showed Kelle the Quad Press and the oval press, and triangle press dies. Next he showed us the Stitching Rolls and Rounding Rolls for the bead roller, and also gave us some pointers on how to use these fabrication tools. Take a tour of the ...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact/ - We're building a 1969 Camaro featuring an 804 horsepower LS9 supercharged LS7 427-based MAST built V8, and we needed it to breathe freely! Our solution was to install a MagnaFlow 3" stainless exhaust system. Starting with a kit built specifically for a '69 Camaro, we added some pi...

#musclecar #v8tv http://www.v8speedshop.com/contact/louschange - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - https://www.facebook.com/pages/V8TV/184624995922 In this video, we're installing a Chassisworks roll cage into our 1969 Camaro called Lou's Change. This is part 2 of the 2-part series. Take a tour of the V8 Speed & Resto Shop! Muscle Car Restoration Shop Tou...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact/louschange -314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - https://www.facebook.com/pages/V8TV/184624995922 In this video, we're installing a Chassisworks roll cage into our 1969 Camaro called Lou's Change. This is part 1 of the 2-part series. Take a tour of the...

1955 Ford Thunderbird 5.0 Coyote Swap Restomod "Coyo-T-Bird" II Much Fuel Vent Install Video V8TV Many classic and muscle cars were built in an era when automakers used open vents to allow air into fuel tanks. These vents were often hidden over the fuel tank, or up along the fuel filler neck. Back in the day, this was perfectly acceptable, but today, we're much more environmentally consciou...

#musclecar #v8tv The key to building exceptional machines is having the right crew and tools to do the job. Mittler Brothers have been building high-end metalworking tools and equipment for years, but their strategy has always been to make them available to home users and pro shops alike. Here, Mike Mittler brings shows us the newly released Jamey Jordan Signature Series bead roller, a tool t...

In this chapter of the Lou's Change 1969 Camaro build, the V8 Speed and Resto shop crew is installing the LSA Engine into the Detroit Speed subframe, and then the subframe to the car. The challenges included making sure the ZL-1 supercharger hat would fit under the stock hood, and then how to fit the air conditioning compressor on the engine, as the DSE subframe requires a high-mount compressor....

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tvhttp://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - One of the doors on our 1968 Chevrolet Camaro "Reloaded" pro-touring car build had a dented and rusty door skin, but the original inner structure was in good sh...

#musclecar #v8tv http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Fabricating chassis and suspension parts often requires a builder to bend tubing, and today we took a look a the new Eastwood Pro Former Tubing Bender and how it works. -~-~~-~~~-~~-~- Take a tour of our restoration shop!: "Muscle Car Restoration Shop Tour V8 Speed & Resto S...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tvhttp://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - The driver side frame rail on our '68 Camaro had a big crack in the arch of the rail. Instead of trying to repair the rail in the car, we removed the old one an...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tvInstallation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - The cowl boxes on our 68 Camaro were very rusty, so we decided to replace both using OER cowl box pane...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tvInstallation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - The original trunk floor was not terrible in our '68 Camaro "Reloaded" project, but it had some surfac...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tv1968 Camaro "Reloaded" Detroit Speed QUADRALink Install Video Pt. 2 Installation Available: http://v8speedshop.com/contact (314) 783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - This 1968 Camaro is being built to drive, both on city streets and ...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tv(314) 783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - This 1968 Camaro is being built to drive, both on city streets and the in occasional track-day event. To accomplish this, we decided to install a Detroit Speed QUADRALink rear suspension syste...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #musclecar #v8tv http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Today we thought we'd let you hear the 490 in the '68 Camaro for a bit, and it sounds killer. It's a stroked 454 with an Eagle crank and rods, JE pistons, Holley oval...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact In this chapter of our S71 Olds build, we are completing the install of our Bullseye Power 75 mm turbo, our fabricated turbo piping, Bell intercooler , and the Be Cool Radiator . All of the exhaust tubing and turbine housing parts were coated by Extreme Powder Coating using their 2200° high temperature black ceramic coat...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - In this chapter, we're fabricating the hardware and tubing needed to install the Bulleseye Power 75 MM extended tip turbo from Outlaw Turbo Motorsports into our 1971 Olds Cutlass S71 project. The install required mati...

Welding Tips: How To Set Any MIG Welder Video V8TV HTP MIG 130 http://www.usaweld.com - Setting the proper wire speed and heat settings is easy if you know how to do it. This video will show you the fastest and easiest way to dial-in your MIG welder properly. This time, we used an HTP MIG 130 for our demonstration unit. We've been using these for years in the V8 Speed & Resto Shop with great...

Contact the V8 Speed & Resto Shop to build or upgrade YOUR ride - (314) 783-8325 http://www.v8speedshop.com #camaro #restoration #v8tvhttp://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - This video covers replacing rusty body mount holes and a smashed subframe crossmember on our 1968 Chevrolet Camaro SS called "Reloaded." -~-~~-~~~-~~-~- Take ...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. -Our '71 Olds Cutlass "S71" is going to make some power with the help of a 76mm turbocharger built by Bullseye Power that we got from Outlaw Turbo Motorsports . Our buddy Brett Evans came by to help with the install, a...

#musclecar #v8tv Installation Available: http://v8speedshop.com/contact http://www.v8speedshop.com/contact - 314-783-8325 Produced by Kevin Oeste and V8TV Productions, Inc. - Our 1965 Chevelle had some pretty nice doors, but they were hiding some rust pinholes that we knew would be problematic later. The last thing we wanted was to finish this car and have it start bubbling with rust spots...